User's Manual
Table Of Contents
- 1 Introduction
- 2 Installation Guidelines
- 3 HX Indoor Physical Installation
- 4 HX Outdoor Physical Installation
- 5 Appendix A: System Specifications
- 6 Appendix B: Ordering Information
- 7 Appendix C: HX Outdoor Non-Standard Connector Descriptions
- 8 Appendix D: Power Cable Specifications
Corning Optical Communications User Manual I CMA-066-AEN I Page 44
5. Referring to Figure 4-7, install the metal profile:
• Drill two holes for the profile anchors (provided), using the profile holes as a guide
• Place the metal profile behind the HX unit-above the bracket, insert the anchors in the wall and tighten
Wall Mounted HX OD with Metal Profile
Figure 4-6