User's Manual
Table Of Contents
- 1 Introduction
- 2 Installation Guidelines
- 3 HX Indoor Physical Installation
- 4 HX Outdoor Physical Installation
- 5 Appendix A: System Specifications
- 6 Appendix B: Ordering Information
- 7 Appendix C: HX Outdoor Non-Standard Connector Descriptions
- 8 Appendix D: Power Cable Specifications
Corning Optical Communications User Manual I CMA-066-AEN I Page 38
HX Unit Interfaces - 1.5.1.1 or 0 for complete description of LEDs.
The LED indicators are the same in both SISO and MIMO model service modules. Figure
3-13 shows an example of the
LEDs on the two service modules in a MIMO unit (SISO units only include one service module).
Location of HX Status LEDs (MIMO Model)
Figure 3-13
Note: The HX monitoring and management capabilities are performed via the host OCH unit. Refer to the SC-450 User
Manual for the configuration and management options.