User's Manual
Table Of Contents
- 1 Introduction
- 2 Installation Guidelines
- 3 HX Indoor Physical Installation
- 4 HX Outdoor Physical Installation
- 5 Appendix A: System Specifications
- 6 Appendix B: Ordering Information
- 7 Appendix C: HX Outdoor Non-Standard Connector Descriptions
- 8 Appendix D: Power Cable Specifications
Corning Optical Communications User Manual I CMA-066-AEN I Page 36
3.3.4 Routing Fiber and Power Cables
Route the fiber and power cables as follows (and close cabinet door):
• Fiber cables - route towards the top of the cabinet
• Power cable - route towards bottom of cabinet
Closed HX (MIMO) Cabinet with Routed Cables
Figure 3-12