User's Manual

Corning Optical Communications User Manual I CMA-066-AEN I Page 27
3 HX Indoor Physical Installation
This chapter describes the mounting procedure and physical connections for the HX Indoor (SISO/MIMO) Remote Unit.
3.1 Unpacking and Inspection
Unpack and inspect the cartons according to the following procedure
1. Open the shipping carton and carefully unpack each unit from the protective packing material.
2. Verify that all the parts have been received (see Table
3-1).
3. Check for signs of external damage. If there is any damage, call your Corning service representative.
Description
Quantity
HX Indoor Cabinet (SISO/MIMO) 1
Power Cable (model dependent):
• AC USA: Cable power, straight, USA 10A, UL, Black,110V, L=1.8-2.5m
(70.8 – 98.4 in)
• AC Europe: Cable, power, W/Plug, 3Cond., Europe, L=1.8-2.5M (70.8
– 98.4 in)
• DC: Power cable with open edges, L=2 M (78.7 in)
Note: Image shown here is example of AC power cable
1
19-in Rack Brackets - used for rack-mount installations 2 (R/L)
Screws, 6-32X1/4,Flat HD, 100’, Philips – used for assembling the rack-
mount brackets on to the HX unit
12
Wall Mount Brackets – used for wall-mount installations 2 (R/L)
Screws, SEMS, 8-32X1/2,PAN, HD, Philips, Flat + Spring Washers – used
for assembling the wall mount brackets to the HX cabinet
8
Table 3-1. HX Indoor Package Items List