User's Manual

Corning Optical Communications User Manual I CMA-066-AEN I Page 18
Table 1-1 and Table 1-2 provide descriptions of the HX Indoor connectors and LEDs.
Connector
Description
F/O SC/APC fiber-optic connector SM fibers
Antenna N-Type female 50Ω duplexed connector for RF antenna
AC PWR 100/240 VAC; 50/60 Hz; 8A Slow Blow Fuse
DC 18 pin power connector for 25-48V DC power feeds
RS-232 Local craft connector
Table 1-1. Connector Descriptions
LED
Description
Color
Status
Power Device is powered Green Steady On
Power not supplied to the unit
Green
Off
Comm When connected and discovered by an
OPTM (BU)
Green Blink per communication
attempt
When device is powered on but no
external communication is received
Green
Steady Slow Blink
Link
No Optical link is present
Green
Off
Low optical link level from OPTM
Green
Blink
Normal optical link level from OPTM
Green
Steady On
Table 1-2. LED Descriptions
The HX Indoor rear panel includes the grounding lug and ventilation fans.
Note: The rear interfaces are the same for both HX Indoor SISO and MIMO cabinets.
Indoor HX Remote Unit - Rear View
Figure 1-8