User's Manual

Corning Optical Communications User Manual I CMA-336-AEN I Page 48
3.4.4 Power Connections
CAUTION!
Any open RF port on GX or improper connection between GX RF ports and filter input ports will damage GX internal power
amplifier after the equipment is powered on. Make sure all connections are performed correctly before powering.
3.4.4.1 AC Models
To connect GX power
1. Unscrew the two screws of the side panel (shown in Figure 3-30) and open to access the power connector.
Figure 3-30. GX Power Connector (AC Model)
2. Connect the supplied power cable to the power supply port:
 Power input: VAC 100-240/47-63 Hz
 Maximum power consumption:
o Quad band remote: 1450 W
 Maximum current consumption: 20 A maximum