User's Manual

Corning Optical Communications User Manual I CMA-336-AEN I Page 47
For connections via GX External Combiner:
1. Using the DIN cables (provided with external combiner), connect each relevant RF output to the corresponding service
connector on the external combiner.
2. Ensure lightening protection for each antenna port.
3. Waterproof all RF ports (recommended drip-loops).
4. Terminate any unused GX and RF ports.
5. Connect external combiner RF output connector to broadband antenna. Refer to Figure 3-29.
Figure 3-29. GX RF Connections with External Combiner