Manualshelf

User's Manual

ManualsBrandsCorning Optical Communication Wireless ManualsElectronicsGX 40W Quad-BAnd Remote Unit
41424344454647484950
Corning Optical Communications User Manual I CMA-336-AEN I Page 45
3.4.2 Fiber Connections
IMPORTANT! OptiTap
®
pullout force ranges from a few lbs to 50+ lbs with the dust cap or connector installed. This prevents
damages caused to the DAS unit.
Connect the GX OP OptiTap port to one of the OCH front panel “Link” ports (via F/O patch panel), using an OptiTap cable
assembly (ordered separately).
IMPORTANT! GX quad-band models GX-E17E85P19L70-40-AC and GX-E17E85P19L70-40-DC do not support coexistence
with other GX models. These must be connected to a different RF path via separate optical module of the OCH. Connecting
these GX models to the same RF paths as other GXs may result in a VSWR alarm.
Figure 3-27. GX Fiber Optic Connection