User's Manual

Corning Optical Communications User Manual I CMA-336-AEN I Page 39
3. Referring to Figure 3-19, mount the wooden pole bracket according to the following steps:
 Drill four holes in the pole according to the distances shown in Figure 3-19.
 Position the bracket onto the wooden pole and screw in the 5/8” screws (provided) into the top and bottom mounting
holes.
 Screw in the two additional screws into the remaining middle mounting holes and tighten.
Note: The distance between the bracket bottom screw and the ground must be at least 20 mm.
Figure 3-19. Mounting the Bracket