User's Manual

Corning Optical Communications User Manual I CMA-336-AEN I Page 38
To mount a GX unit on a wooden pole
1. Using the eight M6×16 hex socket screws and the relevant washers, assemble the three parts of the Pole Bracket as
shown in Figure 3-18.
Figure 3-18. Wooden Pole Bracket Assembly
2. Select the appropriate location for the bracket according to the following criteria:
 General surroundings
 Make sure that the bracket is installed high enough to ensure convenient access to the GX connectors located on the
underside of the unit when mounted.
 Ventilated and easy-to-reach area
 Proximity to the antenna in order to minimize cable loss