User's Manual

Corning Optical Communications User Manual I CMA-336-AEN I Page 29
3. Connectors facing downwards, hook the GX Quad-band on to the top part of the bracket and then to the bottom. Refer to
Figure 3-10.
Figure 3-10. Hookiing GX to Bracket
4. Using a spanner or wrench, tighten the two M8 nuts on the top and bottom of the mounting bracket as shown in Figure
3-11 and Figure 3-12.
Note: It is recommended to use a threadlocker to tightly seal the nuts.
Figure 3-11. Pole Mounted GX – Underside View