User's Manual

Corning Optical Communications User Manual
|
CMA-586-AEN
|
Page 7
1
1
INTRODUCTION
GX products offer scalable, cost-effective 40 W (46 dBm)
high-power remote outdoor coverage solutions for Corning
distributed antenna systems (DAS).
GX remotes compliment both the MA1000/MA2000 platform
and the Corning® optical network evolution (ONE™) solution,
sharing a common equipment headend and element
management system (EMS) with the other system remotes.
GX is a fiber-fed, dual-band, multioperator remote designed to
complement lower power, standard remotes. GX can also be
installed as a dedicated solution for new sites, providing
complete RF coverage in large open indoor, tunnel, and
adjacent outdoor spaces.
Using low-loss fiber optic cabling, GX remote units can
distribute multiple BTS signal sources for 2.3 GHz and 2.5 GHz
TDD to multiple remote locations between 2 to 15 km from the
headend to remotes. GX efficiently supports all operator
modulations with linear MCPA (multicarrier power amplifier)
up to 40 W.
GX remotes offer high RF power coverage capabilities with
compact design for added spaces savings and
weather-resistant enclosures to fit various site needs..
GX Dual-Band Remote | Figure 1.1
1.1 Key Features and Capabilities
Multi-frequency/multiservice RF transport
platform:
• Accommodates LTE technology
• Two bands per enclosure
Cost-effective high power
Optimizes and reduces the number of antennas required to
cover open outdoor areas by offering 46 dBm composite power
per frequency band
Operator-grade operation
Advanced signal handling, RF filtering, and management
ensures operator-grade performance
SISO/MIMO support
Model dependent units supporting either SISO or MIMO
configurations
Unique, space-saving, non-obtrusive design
Blends into the environment and avoids costly tower builds
outdoors when covering campus scenarios, parking lots,
tunnels, and indoor-adjacent outdoor spaces
Designed to withstand harsh environments
Fully sealed remote unit (RU) enclosure ensures superior
performance in harsh environments and worry-free electronics
maintenance. Compliant to NEBS OSP Class 4 rated standard
Management and control
Alarm forward to NOC or standard EMS via SNMP,
software-controlled output power, and optical link auto gain
control