User's Manual

Corning Optical Communications User Manual
|
CMA-601-AEN
|
Page 38
4.2 Appendix B: Ordering Information
Note: The information listed below is updated up to the publishing date. Refer to the GX 40 W dual-band datasheet (CMA-585-AEN) for the
most updated ordering information.
GX Dual-Band Remotes
Services Supported Part Number Description
WCS/2.5 GHz TDD MIMO GX-WCSM2500M-40 GX Dual-Service MIMO for WCS and 2.5
GHz TDD solution supporting 40 W output
for AC powering.
GX-WCSM2500M-40-DC GX Dual-Service MIMO for WCS and 2.5
GHz TDD solution supporting 40 W output
for DC powering.
WCS/2.5 GHz TDD SISO GX-WCSS2500S-40 GX Dual-Service SISO for WCS and 2.5 GHz
TDD solution supporting 40 W output for
AC powering.
GX-WCSS2500S-40-DC GX Dual-Service SISO for WCS and 2.5 GHz
TDD solution supporting 40 W output for
DC powering.
Optical Central Hub (OCH)
Part Number Description
OCH-4-WDM Optical Central Hub for SISO services, supporting four SISO remote units,
single-mode (WDM)
OCH-8-WDM Optical Central Hub for SISO or M
IMO services, supporting eight SISO or four
MIMO remote units, single-mode (WDM)
Extended Radio Interface Modules (RIMe)
Note: GX remotes deployed with the Corning
®
optical network evolution (ONE ™) solution are supported by extended radio interface modules
(RIMe) only.
Part Number Description
RIMe-25T Extended Radio Interface Module with support for the 2500 MHz TDD
band; RF Input: -11 to 37 dBm
RIMe-W23 Extended Radio Interface Module with support for the WCS 2300 MHz
band; RF Input: -11 to 37 dBm