User's Manual

Corning Optical Communications User Manual
|
CMA-601-AEN
|
Page 3
Returns
In the event that it is necessary to return any product against
above warranty, the following procedure shall be followed:
1. Return authorization is to be received from Corning prior
to returning any unit. Advise Corning of the model, Serial
number, and discrepancy. The unit may then be
forwarded to Corning, transportation prepaid. Devices
returned collect or without authorization may not be
accepted.
2.
Prior to repair, Corning will advise the customer of our
test results and any charges for repairing
customer-caused problems or out-of-warranty conditions
etc.
3.
Repaired products are warranted for the balance of the
original warranty period, or at least 90 days from date of
shipment.
Limitations of Liabilities
Corning’s liability on any claim, of any kind, including
negligence for any loss or damage arising from, connected
with, or resulting from the purchase order, contract,
quotation, or from the performance or breach thereof, or from
the design, manufacture, sale, delivery, installation,
inspection, operation or use of any equipment covered by or
furnished under this contact, shall in no case exceed the
purchase price of the device which gives rise to the claim.
Except as expressly provided herein, Corning makes no
warranty, expressed or implied, with respect to any goods,
parts and services provided in connection with this agreement
including, but not limited to, the implied warranties of
merchantability and fitness for a particular purpose. Corning
shall not be liable for any other damage including, but not
limited to, indirect, special or consequential damages arising
out of or in connection with furnishing of goods, parts and
service hereunder, or the performance, use of, or inability to
use the goods, parts and service.
Reporting Defects
The units were inspected before shipment and found to be
free of mechanical and electrical defects. Examine the units
for any damage that may have been caused in transit. If
damage is discovered, file a claim with the freight carrier
immediately. Notify Corning as soon as possible in writing.
Note: Keep all packing material until you have completed the
inspection.
Warnings and Admonishments
There may be situations, particularly for workplace
environments near high-powered RF sources, where
recommended limits for safe exposure of human beings to RF
could be exceeded. In such cases, restrictive measures or actions
may be necessary to ensure the safe use of RF energy.
The equipment has been designed and constructed to prevent,
as far as reasonably, practicable danger. Any work activity on or
near equipment involving installation, operation or maintenance
must be, as far as reasonably, free from danger.
Where there is a risk of damage to electrical systems involving
adverse weather, extreme temperatures, wet, corrosive or dirty
conditions, flammable or explosive atmospheres, the system
must be suitably installed to prevent danger.
Equipment provided for the purpose of protecting individuals
from electrical risk must be suitable for the purpose and properly
maintained and used. This covers a range of activities including
lifting, lowering, pushing, pulling, carrying, moving, holding or
restraining an object, animal or person from the equipment. It
also covers activities that require the use of force or effort, such
as pulling a lever, or operating power tools.
Where some of the abovementioned activities are required, the
equipment must be handled with care to avoid being damaged.
Observe standard precautions for handling ESD-sensitive
devices. Assume that all solid-state electronic devices are
ESD-sensitive. Ensure the use of a grounded wrist strap or
equivalent while working with ESD-sensitive devices. Transport,
store, and handle ESD-sensitive devices in static-safe
environments.
Regulatory Compliance
Information
WARNINGS!
• This is NOT a CONSUMER device. It is designed for
installation by
FCC LICENCEES and QUALIFIED INSTALLERS .
You
MUST have an FCC LICENSE or express consent of an
FCC Licensee to operate this device. Unauthorized use may
result in significant forfeiture penalties, including penalties in
excess of $100,000 for each continuing violation.
• ANTENNAS : Use only authorized and approved antennas,
cables and/or coupling devices! The use of unapproved
antennas, cables or coupling devices could cause damage and
may be of violation of FCC regulations. The use of unapproved
antennas, cables and/or coupling devices is illegal under FCC
regulations and may subject the user to fines.
RF Safety
WARNING!
To comply with FCC RF exposure compliance requirements, each
individual antenna used for this transmitter must be