User's Manual
Table Of Contents
- 1 1Introduction
- 2 2Installation Guidelines
- 3 3System Installation
- 3.1 Selecting GX Dual-Band Mounting Location
- 3.2 Unpacking and Inspection
- 3.3 Additional Required Tools
- 3.4 Required Headend Connections for Deployments with Corning® Optical Network Evolution (ONE™) Solution
- 3.5 Outdoor Concrete Wall-Mountable Installation
- 3.6 Additional Installation Options
- 3.7 GX Connections
- 3.8 Verifying Normal Operation
- 4 4Appendices
Corning Optical Communications User Manual
|
CMA-601-AEN
|
Page 27
Pole-Mountable GX – Dual Mount | Figure 3.11
To mount a GX unit on a wooden pole
1. Using the eight M6x16 hex socket screws and the relevant
washers, assemble the three parts of the pole bracket as
shown in Figure 3.12.
Wooden Pole Bracket Assembly | Figure 3.12