User's Manual
Table Of Contents
- 1 1Introduction
- 2 2Installation Guidelines
- 3 3System Installation
- 3.1 Selecting GX Dual-Band Mounting Location
- 3.2 Unpacking and Inspection
- 3.3 Additional Required Tools
- 3.4 Required Headend Connections for Deployments with Corning® Optical Network Evolution (ONE™) Solution
- 3.5 Outdoor Concrete Wall-Mountable Installation
- 3.6 Additional Installation Options
- 3.7 GX Connections
- 3.8 Verifying Normal Operation
- 4 4Appendices
Corning Optical Communications User Manual
|
CMA-601-AEN
|
Page 24
Disassembling Mounting Hooks | Figure 3.6
3. Assemble the top wall rack on the GX using six M5×12 hex
socket head cap screws (previously removed and set aside).
4. Assemble the bottom wall rack on the GX using eight
M5×12 hex socket head cap screws (previously removed
and set aside).
Assembling Top and Bottom Racks | Figure 3.7
5. Place the GX unit on the mounting ground support with
the connectors facing upwards.
6. Secure the GX to the mounting ground support with the
two sideboards using eight M6x16 hex socket head cap
screws (provided with the accessory kit).