User's Manual
Table Of Contents
- 1 1Introduction
- 2 2Installation Guidelines
- 3 3System Installation
- 3.1 Selecting GX Dual-Band Mounting Location
- 3.2 Unpacking and Inspection
- 3.3 Additional Required Tools
- 3.4 Required Headend Connections for Deployments with Corning® Optical Network Evolution (ONE™) Solution
- 3.5 Outdoor Concrete Wall-Mountable Installation
- 3.6 Additional Installation Options
- 3.7 GX Connections
- 3.8 Verifying Normal Operation
- 4 4Appendices
Corning Optical Communications User Manual
|
CMA-601-AEN
|
Page 20
Item Quantity
Copper Grounding Wire (2 m) 1
RJ45 Ethernet Communication Cable 1
GX Dual-Band Package Items | Table 3.1 (continued)
Additional items required (and ordered separately)
for installations with Corning
®
Optical Network
Evolution (ONE
™
) Solution
Quantity
ERFCv2-OCH – RF Cables used for interfacing between
headend (i.e., HEU/IHU) extender module and the
interface box (IFB)
1
AK-ONE-HE-GX-INTBOX — Combiner/Splitter used for
interface between the headend unit and the OCH
1
OCH-4-WDM (top) – 4-Port Optical Central Hub
supporting up to four SISO remotes; wavelength
division multiplexing technology; single-mode fiber
OCH-8-WDM (bottom) – 8-Port Optical Central Hub
supporting up to eight SISO remotes or four MIMO
remotes; wavelength division multiplexing
technology; single-mode fiber
1
SC-450 – System Controller used for management of
GX and OCH
1
Required Items for GX Dual-Band in Installations with Corning® Optical Network Evolution (ONE™) Solution | Table 3.2