User's Manual

Step 3: Plug the RxU in to the right side of the RAU as
indicated in Figure 2. RxU and RAU interface
ports should face the same direction.
Step 4: Replace the cover except for the front panel
and screws, as shown in Figure 3
Figure 2. RxU Module Assembly
Figure 3. Assembled RxU Interfaces
Figure4.RAUEnclosureLEDS
3. RF CONNECTIONS
 Ifrequiredbysiteplanner–connectthelterto
 theRFlterconnectorsontheRxU.Referto
 Figure3forlocationofRAUandRxUlter 
connections.
5. VERIFY NORMAL OPERATION
Step 1: VerifythatLEDsonfrontcoverindicate
normal operation status:
  • RUN–Blinkinggreen
  • POWER–Steadygreen
  • LINK–Steadygreen
  RefertoFigure4forLEDs.
4. ASSEMbLE RAu FRONT ACCESS
PANEL AND REMOuNT
6. ASSEMbLE RAu FRONT ACCESS
PANEL AND REMOuNT
Corning MobileAccess, Inc. • 13221 Woodland Park Road, Suite 400 • Herndon, Virginia 20171 USA
866-436-9266 • FAX: [phone] • Tech Support Hotline: [phone] or 800-787-1266 • www.corning.com/mobileaccess
Corning MobileAccess reserves the right to improve, enhance and modify the features and specifications of Corning MobileAccess products without prior notification. ONE is a trademark of Corning
CableSystemsBrands,Inc.Allothertrademarksarethepropertiesoftheirrespectiveowners.CorningMobileAccessisISO9001certified.©2013CorningMobileAccess.Allrightsreserved.
Published in the USA. CMA-261-AEN / July 2013
QSG_GENII_RxU_709C012501_RevA00_19MAR13FINAL
RunLED
To External Filter
To External Filter
RxU
RxU
Module
RAU
To MIMO Service
Antenna
PowerLED
LinkLED
QUICK INSTALLATION SHEET | CMA-261-AEN | JULY 2013 | PAGE 2 OF 2
ONE
™
Wireless Platform