User's Manual

Device Configuration
P/N 709C011801
Page 99
7.4 RAU Configuration
To configure the RAU
1. Click on the RAU in the Network Topology (under the hosted OIM) or in the device view area. The Module Info tab is
displayed by default. The selected RAU (and associated OIM) will appear green in the Device View area.
Figure 7-8. RAU Module Info Tab
The Module Info tab includes general information (R/O) such as Location (defined during Setup procedure), S/N, Carrier,
etc.
2. (Optional) Assign RAU name (if not already assigned):
• Click (Name) Modify button
• Enter indicative name in field
• Click OK
• Assigned name will appear in the Name filed and in the topology tree
NOTE: The Module Info tab includes a Reset button (module SW reset) and Identify function which when turned to On
causes corresponding LED on physical module to flicker rapidly enabling to detect the physical location.