User's Manual

Device Configuration
P/N 709C011801
Page 98
7.3.2 OIM
The OIM configuration only consists of assigning the OIM an indicative name (optional).
To configure OIM
1. Click on the OIM in the Network Topology or in the device view area. The Module Info tab is displayed by default. The
selected OIM (and associated RIMs) will appear green in the Device View area.
Figure 7-7. OIM Module Info Tab
The Module Info tab includes general information (R/O) such as Location (defined during Setup procedure), S/N, Band,
Carrier, etc.
2. (Optional) Assign OIM name (if not already assigned):
• Click (Name) Modify button
• Enter indicative name in field
• Click OK
• Assigned name will appear in the Name filed and in the topology tree
NOTE: The Module Info tab includes a Reset button (module SW reset) and Identify function which when turned to On causes
corresponding LED on physical module to flicker rapidly enabling to detect the physical location.