User's Manual

Device Configuration
P/N 709C011801
Page 96
Figure 7-5. RIM RF Parameters Tab
4. Configure RF parameters according to site settings:
• Max Expected Power - set the BTS DL Max Expected Power:
o Default Max. Expected Power = 30 dBm for unit protection
o Range: -15 dBm to 37 dBm in 1 dB steps
o PCS: 0 to 37 dBm
• Automatic Limit Control (ALC) - enable (On=default)/ disable (Off) ALC function for RIM
• Uplink Gain Mode - set the Gain Mode for the selected RIM:
o AutoSymmetrical (default): UL _gain_delta = band target power - max_exp_pwr
o Manual: select the value in the range of -19dB and +15dB (in 1dB steps)
• Uplink Gain - set UL gain value between -19 to 15 dB (in 0.5 dB steps)