User's Manual

Device Configuration
P/N 709C011801
Page 93
7.1 System Management (HCM)
The System Management element is the root element of the Network Topology Tree and is representative of the (HEU) HCM
module. Upon selecting the System Management element, all of the HEU and connected OIU chassis (including RIM and OIM
modules) are displayed in the device view area.
The System Management Config screen also displays the HCM Alarms tab (see section System Management (HCM) Alarms for
details) and the Module info tab.
Figure 7-2. System Management Config Screen
The Module Info tab displays the HCM general information (e.g. SW version, S/N, Adjustment result, etc.) and provides the
following options:
• Assigning the HCM an indicative name (or modifying) - click (Name) Modify button, enter name and click OK. Name will
appear in Network Topology.
• Setting the Time and Date stamp - click (Date/Time) Modify button, set date and time and click OK.
• Resetting (Refresh) baseline (see Removing a Hosted Device from Baseline (on page 103) for details) - click (Baseline)
Reset button.