User's Manual

Device Configuration
P/N 709C011801
Page 91
7 Device Configuration
After successfully commissioning the system and performing the setup procedure (using the Setup Tool), you may now proceed
with (manually) fine tuning and modifying device parameters to suit the site needs via the Web GUI Management application.
The manual configuration and monitoring options are accessed via the Config tab, which provides dedicated configuration tabs
for each device/module.
NOTE: The monitoring and device alarms are described in detail in the Monitoring and Troubleshooting (on page 122)
section.
To configure, view and modify device parameters, click on any of the device elements appearing in the topology tree, or on the
icons in the device view. The corresponding Module Info and configuration option tabs will appear.
Figure 7-1. Web Management GUI - Example of Config Screen