User's Manual

Commissioning the System P/N 709C011801 Page 89
6.6.3.9 Adjustment
The Adjustment phase performs the adjustment procedure for the uplink and downlink gain of the RIMs and OIMs, as well as
adjusting the target output power of the services transmitted from the RAU/RxU.
The Adjustment procedure is initiated upon clicking the "Start" button in the screen. The following figure shows the Adjustment
phase screen.
Figure 6-44. Adjustment Phase Screen
There are six processes, where the status for each one is displayed i the adjacent field. A detailed description of a failed status
can be viewed by clicking on the "Info" link of the process. This can be sued as reference for troubleshooting the failed process.