Manualshelf

User's Manual

ManualsBrandsCorning Optical Communication Wireless ManualsElectronicsREMOTE EXTENDER UNIT
81828384858687888990
Commissioning the System
P/N 709C011801
Page 81
6.6.3.3 MIMO-SETUP
The MIMO-SETUP phase enables the user to configure the RIM modules for the MIMO paths. The user is required to connect
pairs of RIM-M and RIM modules supporting the same band (e.g. AWS) which will then be extended to the corresponding RAU
(via the OIM).
Figure 6-36. MIMO Setup Procedure
• Only one RIM-M can be connected to a specific RIM.
• When a RIM-M is selected, the available and compatible RIM modules will appear in grey. Incompatible/unavailable RIM
modules will appear transparent.
• Before configuring an RF path (connecting with OIM) with a RIM-M and RIM pair, the installation of an RxU must be verified.