User's Manual

Commissioning the System
P/N 709C011801
Page 79
6.6.3.2 Zone Information
The Zone Information phase enables the user to label each unit in the system to help classify and locate the different units with
ease. An example of zone information defined for an RAU can be: Building 1; Floor 1; Room 1. The zone information defined in
this phase will appear in the Module Info tab (Read-Only) of the device in the Web GUI Management (Config).
Figure 6-34. Zone Information Screen
• All of the detected devices for configuration appear in the Zone Information screen. The devices are displayed according to
module type along with their serial number.
• The displayed devices can be filtered according to module type, chassis, etc.
• The zone information consists of a 4 field structure and should be defined so that it provides an indication of the exact
location of the device. This will facilitate easily locating the device if troubleshooting or maintenance is required.