User's Manual

Commissioning the System
P/N 709C011801
Page 78
6.6.3.1 Module Owner
The Module Owner phase enables the user to assign the (HEU) service specific RIM modules to groups (usually corresponding
to operators).
NOTE: The groups must be created before running the Setup Tool - see Defining User Groups (on page 107) section.
After a RIM module has been assigned to a specific group, only a user from that group will have access to the RIM. In addition,
the Setup Tool enables assigning all of the RIM module to all of the groups ("All" option in group list) so that they are all
accessible to everyone.
The default setting for this phase is that all RIMs are shared (group=All).
Figure 6-33. Module Owner Screen