User's Manual

Commissioning the System
P/N 709C011801
Page 67
Figure 6-19. Download Complete Message
The Zone Info is displayed in the Zone Information screen in the corresponding fields and in the (Config) Module Info
tabs of each module.
5. Click Next to continue to the MIMO SETUP screen.
6. To configure modules for MIMO path:
o Select a RIM-M and the available RIM module(s) is indicated.
Figure 6-20. MIMO Setup Phase
o Click on the RIM module to be connected to the RIM-M, so that both appear in green.
o Click on the Join button to connect the selected pair.