User's Manual

Commissioning the System
P/N 709C011801
Page 64
• If all of the RIM modules are to be accessible to all groups, enable the Select All checkbox and then select All from the
list of groups.
Figure 6-14. Assigned RIM Modules
• The selected and assigned RIM modules appear in green with a blue checkmark.
• If not all of the RIM modules are assigned to a group, the following message appears:
Figure 6-15. Unassigned RIM Module Alert Message
• Click OK to continue or Cancel to assign the remaining RIM modules.
3. Click Next to continue to the Zone Information phase. The Zone Information screens appears with the list of all of the
detected system modules (displayed according to type - e.g. RIM, OIM, etc. and serial number).