User's Manual

Commissioning the System
P/N 709C011801
Page 58
3. To change the LAN Port network settings, click the Modify button in the LAN Port Configuration Area. The following
dialog appears.
Figure 6-6. IP Settings LAN Port Modify Dialog
To Define… Do This…
Static IP Address
Set DHCP as None.
Enter the IP Address, Subnet and Gateway.
Click OK.
Dynamic IP Address Set DHCP as Client and click OK.
Table 6-1. LAN Port IP Settings
4. To change the LOCAL Port network settings, click the Modify button in the LOCAL Port Configuration Area. The
following dialog appears.
Figure 6-7. IP Settings Local Port Modify Dialog