User's Manual

Commissioning the System
P/N 709C011801
Page 57
6.2 Configuring HCM Network Settings for Local and Remote
Management
There are two options for configuring the HCM network parameters for remote management across the customer LAN:
• HCM LAN port – assigning the HCM LAN port a static or dynamic IP address
• HCM LOCAL port – assigning a static IP address and connecting to the customer’s LAN for remote management; however,
for troubleshooting and service purposes, a local connection is recommended.
NOTE: The IP address configuration options are provided on the Management, IP Settings pane. The same pane also provides
a Ping tool used for verifying access to other IP hosts (see section Ping Tool - Verifying IP Host Access (on page 59)).
To Configure HCM for Remote/Local Management
1. Open a Web session
2. Select the Management tab and then click IP Settings on the side bar menu.
Figure 6-5. Management-IP Settings Tab