User's Manual

Unit Descriptions - RF Path
P/N 709C011801
Page 39
Interface Description
Power Connectors
Up to eight DC power connectors, depending on number of power supply
modules installed.
LC/APC
SM optics connectors implemented by up to two Edge modules inserted
from the rear: six connectors per Edge module.
AC Power Input 110-230VAC power input to unit.
Table 2-11. ICU Front Panel Interface Descriptions
Edge modules and power supplies are extracted and inserted from the rear of the unit.
Figure 2-13. ICU Rear Panel Interfaces and PSM Modules
2.2.2 RAU (Remote Antenna Unit)
The RAU distributes up to four RF services via internal antennas (external antennas are optional). The RF services are received
over optic cables and converted for distribution over internal (or optionally external) antennas.
Figure 2-14. RAU Module
NOTE: The RAU enclosure can host two additional modules: RxU for MIMO support and GEM for digital coverage. See relevant
sections for details on these modules.