User's Manual

Unit Descriptions - RF Path
P/N 709C011801
Page 32
The following tables provide a description of the RIM ports and LED status indicators.
Port Description
DL/UL UL and DL simplex connections to the RF signal source
DUP Duplexed UL and DL connection to the RF signal source
Table 2-4. RIM Ports Description
LED Description
Protect
Green – RF signal is at normal level
Red (Blinking) - Indicates the RF signal is too high and that the protection
mechanism is enabled
DL High
Provides indication on DL RF level in conditioner module:
Red – Signal is 2 dB above max. expected power
DL Low
Provides indication on DL RF level in conditioner module::
Red – No signal or 15 dB below max. expected power
RUN
Steady Green - Power on and module SW has initialized and is up and
running
Blinking Green- Fault detected (e.g. RIM module SW halted) orSW
upgrade in process
Off - No power
PWR On - Input power is within required range
Table 2-5. RIM LED Descriptions