User's Manual

Monitoring and Troubleshooting
P/N 709C011801
Page 126
9.3 Fault Sourcing through the Device View and Alarms Tab
When an item in the Network Topology Tree is clicked, an icon representative of the device view appears along with the
configuration and Alarms tabs. The LED indicator on each module in the device view represents the overall status of the module
which corresponds to the Overall Status alarm in the Alarms tab and the LED in the Network Topology. The administrator can
then assess the display at a glance and further analyze the situation via the device Alarms tab displayed for each module.
Figure 9-3. Example of Selected Device in Network Topology and Device View
9.3.1 HCM (System Management) Device View and Alarms
The HCM (System Management root item) is the only network element for which a device view is not displayed. The Alarms tab
displays the HCM alarms.
Figure 9-4. HCM Device Alarms