User's Manual

Device Configuration P/N 709C011801 Page 103
7.6 Removing a Hosted Device from Baseline
The System Management application automatically detects system elements physically connected to it and adds it to the
base-line. When the communication with a device is faulty (i.e. the device is disconnected) an alarm is generated. Therefore,
when removing (disconnecting) a hosted device from the system, the base-line must be re-set in order to update the removal
and to prevent an alarm from being raised.
To Perform Reset the Baseline
1. Double-click on the System Management root in the Network Topology. The HCM Module Info tab is displayed.
2. Click (Baseline) Reset button to set new baseline that does not include the disconnected device.