Manualshelf

User's Manual

ManualsBrandsCorning Optical Communication Wireless ManualsElectronicsREMOTE EXTENDER UNIT
919293949596979899100
Device Configuration
P/N 709C011801
Page 100
3. Click on the RF Parameters tab. The following tab appears.
Figure 7-9. RAU RF Parameters Tab
The RAU RF Parameters tab includes the input power (dBm) measured by the DL power detector for each service and
the RAU Antenna Source option.
4. The Antenna Source type is set to Internal by default. To change to External - click the Modify button, select External
option and click OK.
NOTE: make sure that an external antenna is connected to the RAU.