User's Manual

Table Of Contents
Installation RF Path Elements CMA-331-AEN Page 96
Draft
5.1.4.2 Assembling Cable Management Tray onto IHU and Connecting ERFC Cable
Note the following:
The IHU Cable Management Tray is used for managing the unit connection cables.
The IHU Cable Management Tray includes a routed ERFC34 cable; Expander Cable - RF interface cable between RIX and
OIX modules; 9 pin SMP to SMP connector; L=34 in
The Cable Management Tray consists of two items:
Cable Management Tray with routed ERFC cable
Door Sleeve
A Phillips screwdriver is required.
Assemble the provided Cable Management Tray and connect ERFC Cable (routed through tray) as follows:
1. Attach Cable Management Tray to IHU chassis:
Figure 5-38. Assembling Cable Tray