User's Manual

Table Of Contents
Installation RF Path Elements CMA-331-AEN Page 81
Draft
Figure 5-20. RIM LEDs Figure 5-21. HCM/ACM LEDs
5.1.2 OIU Installation
Note the following:
OIU chassis is supplied empty and only includes the factory assembled FAN Module (FAM). All other modules are ordered
separately and must be installed.
The Cable management Tray can be assembled either before or after the unit is installed (see section 5.1.3 - HEU/OIU
Cable Management Tray).
5.1.2.1 Items Required for OIU Installation
The following items are required for installing the ONEOIU. If any of the listed items are missing, contact your Corning
representative.
OIU Kit
Quantity
Item
OIU Chassis (with blank panels) - with FAM Unit on the rear side of
the chassis
1
Fan Module (FAM) one unit hosting four fans
(factory installed in chassis rear)
1
RJ45/RJ45 communication cable L=2m-2.15m (P/N 705900003)
ACM management cable
1
OIM Kit (1-12 according to order)
Quantity
Item
Optical Interface Module (OIM)
1