User's Manual

Table Of Contents
Introduction CMA-331-AEN Page 27
Draft
1.4.1 Overall Device Display - Management Tab
The Management window is displayed by default upon login and includes the following for each selected element:
Network Topology Tree - hierarchically displays the connected and available site devices and their status.
Device Management Tabs - device specific which include the configurable parameters (e.g. service control, RF parameters)
and general information (e.g. device name, Firmware version)
Device View - visualization of device, with LEDs corresponding to the device status. Device view can be used for fault
sourcing at a glance.
Alarms - displays the device alarms for fault sourcing and provides alarm masking options
Note the following:
The device selected in the Network Topology Tree appears green in the Device View Mode area
Point to module in Device View to display property info
Figure 1-6. Management Tab