User's Manual

Table Of Contents
Installation Digital Coverage Elements P/N 709C011801 Page 149
Draft
6.2.2 Routing Connection Cables
1. Locate DC, fiber, Ethernet and grounding wiring connections.
2. Route the connection cables through the center of the Mounting Bracket. See Figure 7-5.
Figure 6-5: Mounting Bracket on Wall
6.2.3 Installing the Mounting Bracket
Note the following:
For wall mount installations - GEU-S must be installed parallel to the wall with the connectors facing downwards. See
Figure 7-7
For above acoustic ceiling installations:
Allow for at least 1 inch above the acoustic ceiling for air flow cooling.
Safety screw tab (shown in Figure 7-8) should be positioned to face the same direction as the GEU-S connectors.
Refer to Figure 7-6 for bracket dimensions.
Figure 6-6: Mounting Bracket Dimensions