User's Manual

Table Of Contents
Installation RF Path Elements CMA-331-AEN Page 138
Draft
2. Connect fiber to SFP module ports as follows:
If using fiber terminated with LC APC (green), connect to pre-inserted APC to UPC adapters
If using fiber terminated with LC UPC connector (blue), remove pre-inserted APC to UPC adapters and connect directly
to SFP module ports.
3. Connect the A and B Ethernet ports to the PoE clients using Ethernet cables.
Note: A and B ports 10/100/1000 BASE-T with 802.3at compliant Power over Ethernet (PoE+) PSE ports.
Figure 5-95. GEM Module Interfaces Connections
5.2.3.8 Verify Normal Operation
Referring to Figure 5-96 and Table 5-12 verify normal operation of RAU5, RxU and GEM (if installed) modules.
Figure 5-96. RAU5, RxU and GEM LEDs