User's Manual

Table Of Contents
Installation RF Path Elements CMA-331-AEN Page 113
Draft
5.2.1.4 Mounting ICU in 19-IN Rack
Note the following:
Continue to next section if ICU is to be mounted on wall.
If the ICU is rack mounted, the modules can be inserted either before or after the unit is mounted.
Mount the ICU in the 19-in communication rack and secure using pre-assembled bracket.
Figure 5-60. ICU Rack Brackets
5.2.1.5 Mounting ICU on Wall
1. Remove the rack mounting brackets and set the screws aside.
2. Using the screws (previously set aside), assemble the wall mount brackets onto the sides of the ICU.
3. Using the wall mount bracket holes as a guide, mark the holes to be drilled on the wall.