User's Manual

Appendix B: Ordering Information CMA-438-AEN Page 47
Draft
Cable Assembly
1
4
7
Select connector.
Select cu conductor count.
Select cable type.
00 = None 0 = No conductors U = Fiber + copper conductors
18 = LC APC duplex 2 = 2 conductors G = Fiber only
66 = SC APC duplex 4 = 4 conductors
6 = 6 conductors
2
5
8
Select connector. Select cu connectors.
Select armored or non-armored
8 = LC/APC duplex
C = With connectors 20 = Non-armored
66 = SC/APC duplex
N = No connectors
A3 = Armored indoor plenum
3
6
9
Select cu wire gauge Select fiber count.
Select cable length.
F = 12 AWG 04 = fibers
010 – 999 ft (see Note 2)
G = 14 AWG 06 = 6 fibers
H = 16 AWG 24 = 24 fibers (*see Note 1)
48 = 48 fibers (*see Note 1)
10
72 = 72 fibers (*see Note 1)
Select pulling grip.
96 = 96 fibers (*see Note 1) P = One-sided pulling grip
E4 = 144 fibers N = No pulling grip
Note 1:
Fiber-only trunk cables (no conductive pairs); MTP connector is standard
– for other options, please contact Customer Care
11
Note 2:
Cable lengths:
• Preconnectorized cable can only be ordered in 10 ft increments.
• Non-connectorized bulk cabling can only be ordered in 50 ft increments.
Select kit.
Note 3: Available for 24 and above fiber cables only
K = Two strain-relief
trunk holders (*see Note 3)
N = None
Corning Optical Communications Wireless. • 13221 Woodland Park rd, Suite 400 • Herndon, VA 20171 USA
866-436-9266 • FAX: [phone] • Tech Support Hotline: [phone] or 800-787-1266 • www.corning.com/opcomm
Corning Optical Communications Wireless reserves the right to improve, enhance and modify the features and specifications of Corning Optical
Communications Wireless products without prior notification. All other trademarks are the properties of their respective owners. Corning Optical
Communications Wireless is ISO 9001 certified. © 2015 Corning Optical Communications. All rights reserved.
UM_MRU_709C017501_10SEPT2015_DRAFT