User's Manual
Table Of Contents
- Corning
- Mid-Power Remote Unit (MRU)
- Preface Material
- About This Manual
- Hardware
- Software Warranty
- Returns
- Limitations of Liabilities
- Reporting Defects
- Warnings and Admonishments
- Regulatory Compliance Information
- RF Safety
- Laser Safety
- Care of Fiber Optic Connectors
- Company Certification
- Licensee Contact Information
- Table of Contents
- 1 Introduction
- 2 MRU Interfaces
- 3 Installation Guidelines
- 4 Installation
- 5 Appendix A: Specifications
- Supported Services
- Coupling Specifications
- Physical Specifications
- 6 Appendix B: Ordering Information
Introduction CMA-438-AEN Page 12
Draft
1.2 General System Specifications and Requirements
1.2.1 Environmental and Regulatory Specifications
Operating
Storage
Temperature -40° C to +65° C (-40°F to 149°F)
-30° to 85°C (-22° to 185°F)
Table 1-1. Temperature and Humidity Specifications
1.2.2 Safety and Regulatory Approvals
Regulation/Standard
Category
Approval
Laser Safety
FDA/CE 21 CFR 1040.10 and 1040.11 except for deviations pursuant to laser notice no.
50 and IEC 60825-1
EMC FCC 47 CFR Part 15, 22, 24, 27
Safety UL 60950
IEC 60825-1:2007
IEC 60825-2:2010
CAN/CSA-C22.2 No.60950-1-03
NEBS GR-63, GR-1089 (with outdoor enclosure)
Table 1-2. Safety and Regulatory Approvals
1.2.3 Power Specifications
Power Spec
Description
Power consumption
(maximum)
DC Version: 330 W AC Version: 360 W
AC: Power input 100-240 VAC/50-60 Hz
Max. AC current
consumption
5 A
DC: Power input
DC class 1- 48VDC (40-60VDC) 9 A max
DC class 2- 24VDC/48VDC (20VDC – 60VD)
Power amplifier consumption per pair: 50 W
Maximum power consumption: 330 W
Maximum current consumption: 1.75 A per pair
Maximum current draw per pair: 64 W
Table 1-3. MRU Power Specifications