Use and Care Guide

Page 3 of 3
F. Allow area to dry and vacuum excess. Soak with lukewarm water for one minute and blot with sponge
or white paper towel. Repeat until no stain is evident on the sponge or towel. If stain persists, follow
directions in Method A, from the use of Cleaning Solution and water onward.
G. Blot excess. Test non-oily nail polish remover on an obscure non-visible piece of carpet to see if it
removes carpet color. If not, gently apply remover using a cotton swab (do not wet through to carpet
backing), beginning at outside edge of stain and working toward center, and blot. Repeat if necessary.
Brush up pile and allow to dry.
H. Freeze area with ice cubes. Shatter frozen gum with blunt instrument. Vacuum up pieces before they
melt. Blot to absorb any remaining moisture with white cloth. When dry and brush the pile to restore
texture.
HOMEOWNER OBLIGATIONS
To maintain warranty coverage and ensure fast and easy warranty service, the homeowner is responsible
for the following:
• Keep two square feet (0.2 m
2
) of excess unused carpet remnant after installation for testing
purposes.
• Keep and be able to provide the original sales receipt or documentation illustrating proof of
purchase and installation date of the carpet.
• Make sure the carpet is installed according to the latest version of the CRI Carpet Installation
Standard.
• Keep the receipts of periodic professional cleaning as proof of maintenance.
• Keep a list of products used to clean the carpet.
This document is effective as of April 2018