Technical information

Ice Frost Training Manual

INSTALLATION

1. Remove the equipment from the packing, then slide it off upwards

(see FIGURE 2).

2. Checking the machine identification after removing the packing,

you must check that the equipment you have received is exactly as

you ordered, making sure the specifications indicated on the

invoice or the delivery note are identical to those on the data plate.

FIGURE 2

3. Equipment accessories

The following accessories are included inside the bowls:

• This Installation and Operator’s Manuals;

• 1 tube of Vaseline to be used for the maintenance machine the requires;

• A drip tray.

The back-lit cover is packed separately from the machine.

4. Positioning - make sure the machine’s bodywork is well ventilated, at least 6”, and do not install near

heat sources.

We recommend you keep the room temperature at between 59 and 77°F.

IMPORTANT: All the pieces of packing must be kept out of reach of children as they represent

potential hazards.

5. Remove gear motor shipping pins and tags from the rear of the unit prior to installation.