Technical information

Ice Frost Training Manual

8. Remove the tap from its valve body,

pressing the two clamping wings at the

same time (FIGURE 24) and pushing

upwards.

FIGURE 24

9. Remove the tap, holding the body pressed downwards, then slide the lever out of the valve body.

Wash all the parts thoroughly with hot water and mild detergent, rinse them well, and replace them.

10. Separate the bowl from its cover, releasing

the fastening by pulling them upwards and

rotating them a quarter turn, as shown in

FIGURE 25.

FIGURE 25

11. Wash the bowl and cover carefully with

water and mild detergent, rinse them well,

and replace them, making sure the sealing

strip (A) is positioned correctly between

the cover and the bowl. To guarantee the

seal, the rounded part of the said sealing

strip (as shown in FIGURE 26) must be

facing the cover.

FIGURE 26