Technical information

Ice Frost Training Manual

BI-ANNUALLY CLEANING AND SANITATION

ATTENTION: The cleaning operations must be performed with the machine disconnected from the

power supply.

1. Empty the bowl of any remaining product and switch off the main switch see FIGURE 14 on

page 12.

2. Remove the cover (B) - FIGURE 30.

3. Extract the quick couplings (C2) / (F2) - (FIGURE 17, FIGURE 18, and FIGURE 19).

FIGURE 17

FIGURE 18

FIGURE 19

4. Disconnect the probe fastenings (FIGURE 17, FIGURE 18, and FIGURE 19).

5. Pull the lockpin/safety pin upwards

(FIGURE 20, A).

CAUTION: There is a spring below the

safety pin. Take caution when removing

the pin that the spring does not fall into the

unit or eject the pin.

FIGURE 20