Technical information

Ice Frost Training Manual
Publication Number: TP01080 - 6 - © 2005, IMI Cornelius Inc.
ELECTRICAL TEST
Receptacle Test (FIGURE 7)
• Open ground - Ground contact not connected.
• Open neutral - Neutral contact not connected.
• Open hot - Hot contact not connected.
• Hot and ground reverse - Hot and Ground contacts interchanged.
• Hot and Neutral reversed - Hot and neutral contacts interchanged.
FIGURE 7
Volt/Ohm Meter (FIGURE 8)
Check the following:
• Voltage at receptacle.
• Correct voltage range.
Used to troubleshoot the unit and components.
FIGURE 8
IMPORTANT: If the power supply cord is damaged, it must be replaced by qualified persons only
to prevent any possible risks.