Instruction manual

3
1 - IMPORTANT WARNINGS AND SUGGESTIONS
The present instruction manual is an important part of
the ICE FROST MANUAL 2.2 slush machine and must
be kept for any future consultation.
Carefully read the warnings contained in this instruction
manual before installing and operating the ICE FROST
MANUAL 2.2 slush machine.
Besides providing information on routine maintenance
of the slush machine and aiding the technical assistants
in the detection and repair of possible malfunctions,
the objective of this manual is to take advantage of the
maximum potentials of the ICE FROST MANUAL 2.2
slush machine in order to adapt the machine to the
specific needs of the various countries where it will be
used.
Modification of, or any attempt to modify this machine,
is extremely dangerous and will cancel any form of
warranty.
All maintenance procedures must be performed by
expertly qualified personnel. The attempt to repair the
machine by unqualified persons is dangerous and may
cause serious damage to the machine.
2 - TECHNICAL CHARACTERISTICS
2.1 Specification plate
The voltage and frequency rates are found on the
specification plate.
In order to prevent the oil contained in the compressor from
flowing into the cooling circuit, it is necessary to always carry,
store and handle the slush machine in a vertical position,
following the instructions found on the packaging.
The special wooden pallet, equipped with fork-lift slots, allow
the machine to be moved with common handling and lifting
equipment.
3 - INSTRUCTIONS FOR MACHINE TRANSPORT